Original
By certification 
Product Introduction
The F3000 series 8x4 Construction Dump Truck is a kind of special hopper that can be tipped over for short distance conveying materials. It is designed and produced according to the standard, and all the indexes of this product meet the standard. It is equipped with hydraulic brake, which is smooth, safe and reliable and improves the mechanical efficiency. It adopts gravity unloading and bumping block type mechanical return bucket, which is easy to operate. Also, this truck has low fuel consumption, improves the efficiency of power transmission and is easy to maintain.
Product feature and application
8x4 Construction Dump Truck does not require much for the road surface and condition, and can be used in narrow sites and poor road conditions. It is suitable for short-distance transportation of various bulk materials such as concrete, gravel, earth, coal, ore, fertilizer, etc., in construction, water conservancy, road construction, factories and rural areas. Dump trucks are normally composed of car chassis, hydraulic lifting mechanism, cargo compartment and power take-off device and other components. The carriage of dump truck is divided into two kinds of rearward tipping and lateral tipping, and rearward tipping is more common, and you can just push the piston rod to make the carriage tipping.
Product details
● The taillight is equipped with a protector to improve the adaptability of complex working conditions, which reduced the risk of the taillight from being damaged.
● Three-layer beam for 8×4 dump truck, the bearing capacity is greatly improved and the bending strength is high.
● The use of flat tank and optimal placement further improves the ground clearance with better trafficability.
● A variety of lifting cylinders are available (domestic, DeppKaler, Hyva), lifting capacity up to 100T, lifting time between 14-45 seconds. The front lifting mechanism has the advantages of high efficiency, simple structure, great lifting stability and large lifting capacity.
Product parameter
Platform |
F3000 |
|
Drive type |
8X4 |
|
Vehicle Weight |
GVW：8.5 tons |
|
| GCW：90 tons | ||
Frame |
850×320(8+7+8) |
|
Wheelbase |
1800+3175~4575+1400 |
|
Engine |
Weichai |
Emissions: Euro II to Euro V |
| Displacement: 10L – 12L | ||
| Power: 340 PS – 550 PS | ||
| Torque: 1400 Nm – 2100 Nm | ||
Cummins |
Emissions: Euro II to Euro V | |
| Displacement: 10L – 12L | ||
| Power: 340 PS – 550 PS | ||
| Torque: 1400 Nm – 2100 Nm | ||
Transmission |
FAST 12 or 16 speed manual |
|
Clutch |
φ430 |
|
Steering gear |
ZF8098 |
|
Axle |
Front axle: MAN 9.5 ton |
|
| Rear axle: MAN 16 ton single or double reduction | ||
| Gear ratio: 4.769 –5.92 | ||
Suspension |
few leaf spring front and rear setup |
|
Tires |
12.00R20 |
|
Fuel tank |
300 - 500 liter aluminum or steel tank |
|
Cab |
Standard |
|
| Lengthened flat roof | ||
Configuration |
Hydraulic main seat, Four point hydraulic suspension, electric windows, ordinary heater, manual cab turnover, square muffler, metal bumper, hinged upper pedal, 165ah maintenance free battery, SHACMAN logo |
|
Product Images
 |
|
http://www.global.shacman.com/
